Ore purity?

[MagicManICT]

So there are 100% ore nodes out there? Ore with processing you can make 100% metals?

You can, in theory, find 100% nodes. No guarantees that purity after processing will be that high, either.

[Powowclouds]

So there are 100% ore nodes out there? Ore with processing you can make 100% metals?

You can, in theory, find 100% nodes. No guarantees that purity after processing will be that high, either.

Gotcha, thanks for the info.

[k545836]

Mix with pure and 16/9 smelts.

Does not work that well anymore. You will get average of your 16/9 bar and pure ore.

[L33LEE]

Mix with pure and 16/9 smelts.

Does not work that well anymore. You will get average of your 16/9 bar and pure ore.

You really should not tell someone who has crafted like 5k iron bars "how it works" lmfao.

[Powowclouds]

Can I get a bit more info on the pure-16/9 smelts... as ive only been doing pure smelts no lime?

[L33LEE]

Can I get a bit more info on the pure-16/9 smelts... as ive only been doing pure smelts no lime?

16/9 is ratio of ore / lime used for best results without diluting the ore too much when producing your bulk bars.

You normally get a cycle of like 2 bar, 2 bar, 1 bar, 2 bar, 2 bar 1 bar or so when using 16/9 ore.

However, after you get a 1 bar cycle when using a 16/9 ratio, it means the next cycle, even if you use 25x ore, will yeild 1 bar, due to how the rounding up and background smelter statistics work. So you can produce 2,2,1 bars of your normal mix 16/7, then after you make your 1 pure bar (25 ore), you go back to the 16/7 cycle.

Or something like this, i personally have not smelted in a couple months though so your asking the wrong person ^.^

[k545836]

Or something like this, i personally have not smelted in a couple months though so your asking the wrong person ^.^

Yet you laughed very loudly at me.

[Powowclouds]

Can I get a bit more info on the pure-16/9 smelts... as ive only been doing pure smelts no lime?

16/9 is ratio of ore / lime used for best results without diluting the ore too much when producing your bulk bars.

You normally get a cycle of like 2 bar, 2 bar, 1 bar, 2 bar, 2 bar 1 bar or so when using 16/9 ore.

However, after you get a 1 bar cycle when using a 16/9 ratio, it means the next cycle, even if you use 25x ore, will yeild 1 bar, due to how the rounding up and background smelter statistics work. So you can produce 2,2,1 bars of your normal mix 16/7, then after you make your 1 pure bar (25 ore), you go back to the 16/7 cycle.

Or something like this, i personally have not smelted in a couple months though so your asking the wrong person ^.^

Do you ever switch back to the 16/9 ratio?