Salem

After doing alot of tanning recently i have noticed several things i was curious as to if they are intended or bug's.

You cannot fill an empty tanning tub with water directly, however you can add water IF tanning fluid is already inside the tub.

When the concentration falls below 4.6, the water graphic inside the tub vanishes, however you can continue to add water to fill the tub to full. (and get the concentration as low as 0.1)

Then once full you can bring the tanning tubs concentration up by applying brains to the tub.

Once the concentration is 4.6 or above the water graphic reapears and you are also able to start tanning with 4.6 concentration or above.

That's odd. And it shouldn't tan below 5.0 concentration.

TotalyMeow wrote:That's odd. And it shouldn't tan below 5.0 concentration.

I also have a tanning tub with 10.1 concentration.

Well i am unsure if they cycle will complete, but the progress bar is filling at 4.6%, can let you know the outcome tomorrow, weird how it works in sync with the water effect as well.

Right, the tanning tub which had 4.6% concentrate finished tanning the 4 limed hides, however after the cycle the concentration dropped to 4.5, so i have been forced to add a brain to the tub to bring it upto 5.0 so i can tan more hides.

So to confirm, you can tan with a concentration of 4.6 for one cycle, then it drops to 4.5