Page 3 of 3

Re: Farming Influence Flow-chart: Need corn icons updated on

PostPosted: Thu Jan 10, 2013 9:32 am
by Jalpha
Bump. Please see the first page.

Re: Farming Influence Flow-chart: Need corn icons updated on

PostPosted: Sat Jan 12, 2013 1:01 am
by Mushibag
This is an excellent chart. Unfortunately I do not have a lot of experience with corn, so hopefully someone else can help you out in that regard. But good job, nonetheless.

Re: Farming Influence Flow-chart: Need corn icons updated on

PostPosted: Thu Apr 10, 2014 11:00 pm
by theMGMT
So is the table on the wiki incomplete or can I not tier 3 pumpkin by doing cereal, pumpkin, pumpkin?
In other words I have 16 of each field. Using this chart I am trying to get every possible crop. So for my 16 pumpkin fields I am planning on doing pumpkin until influence meter hits 100 then 8 cabbage and 8 cereal. Will this get me tier 2 and 3 cabbage and cereal? Or do certain bar values not match up for tier 3 if you do this?

Re: Farming Influence Flow-chart: Need corn icons updated on

PostPosted: Thu Apr 10, 2014 11:11 pm
by lachlaan
To get tier 3 stuff you need between 150 and 200 in the combined meters that a crop needs for both of its Tier 2 results. Pumpkin up to 100 in bar 4 will yield you a full crop of green cabbage and a full crop of only rye, i think. To get to tier 3 or a mix of tiers you'd need to get extra influence in bar 3 for cabbage and extra influence in bar 1 for wheat. The chart doesn't show the order properly, in that, to get Wheat you'd need to either do pumpkin->100bar4, then cabbage->100bar1, then plant cereal and get wheat.

Edit:
Image


There, I fixed that picture to be a bit more explicit in terms of order, assuming 2000% plenty you can just directly plant the starter crop, the secondary, and the wanted result one each. Alternatively get starter crop to full 100 bar, then make sure to get the secondary up fast enough to match the first bar's decline. To get the wanted crop's Tier 3 you'll need 150+ total between the two bars needed. So 100 in starter bar then at least 151 total influence in both bars as the first one declines. Hope this helped.

Re: Farming Influence Flow-chart: Need corn icons updated on

PostPosted: Fri Apr 11, 2014 2:25 am
by DarkNacht
lachlaan wrote:Edit:
Image

The cotton you get after oats is Egyptian.

Re: Farming Influence Flow-chart: Need corn icons updated on

PostPosted: Fri Apr 11, 2014 10:53 am
by lachlaan
Ah right cheers :) Well I wish someone could pretty up the one i made like the first xD It was 3AM and that was all i could muster, and fix the cotton thing :D

Re: Farming Influence Flow-chart: Need corn icons updated on

PostPosted: Fri Apr 11, 2014 3:16 pm
by Spazzmaticus
Keep in mind that, as mentioned before, tier 3 crops come in when the value of the meters is above 150. The tier 2 crop you get besides the tier 3 one depends on the meter that is the lowest of the 2 influencing ones. A 100 green meter and a 95 red one will give you sea island and indian cotton while the opposite will give you sea island and egyptian cotton. In other words, the tier 3 crop replaces whatever the highest meter would normally give.

Re: Farming Influence Flow-chart:Updated with Corn & such

PostPosted: Mon Aug 17, 2015 1:30 am
by Murphy
There, I updated this chart to include all the crops available at the moment.
Image

Re: Farming Influence Flow-chart: Need corn icons updated on

PostPosted: Mon Aug 17, 2015 5:25 pm
by TotalyMeow
That's very nice. Though I really hope we can fix the influence to have things working properly some day soon.